Laser Engraver ACMER S1 2.5W Processing Machine Laser Cutting Machine

ACMER S1 2.5W Laser Engraver, GRBL Compatible Laser Cutter

I use the same laser machine for my hobby. It's a very good laser for beginners. However, I found that it takes time and knowledge to set it up properly. So, I bought another one of the same laser to gain more experience. I don't need two lasers, so I'm selling this one.
This is a completely new machine. It has been unboxed, assembled, configured correctly, and tested. That's why I'm listing the status as Almost New.
Besides the configuration, I have also confirmed that the laser output is indeed around 2.5W and it works properly on basic materials.
You can see the test results in the last picture.

【Specifications】
Brand: ACMER
Model: S1
Materials: Wood, Bamboo, Plastic, Paper, Leather, Acrylic, Painted Material, Stone
Cannot engrave on metal
Laser Power: 2500mw
Laser Wavelength: 445±5nm
Supported Software: LaserGRBL, LightBurn
Image Formats: JPG, SVG, PNG, BMP, G-code, CAD, AI, CDR, DWG, etc.
Engraving Size: 130mm*130mm
Spot Size: 0.04*0.04mm
Engraving Speed: 10,000mm/min
Dimensions: 22cm*26cm
Net Weight: 1500g

【Additional Notes】
1. This machine can cut wood up to 2-3mm thick in a single pass.

2. It supports the use of LightBurn and LaserGRBL software to connect to the laser machine and is compatible with Windows and macOS operating systems.

3. This laser engraver is very quiet compared to similar machines.

4. If you want to increase the output, you can remove the laser module and replace it with a better one. Therefore, you don't need to buy a completely new device for upgrades.

5. The instructions are written in native English, so you can understand them clearly. However, there are no Japanese instructions.